PCB Rules and Violations

Parent page: PCB Panels


Browse, edit and interactively view design rules and their associated violations.

Summary

Design Rule Checking (DRC) is a powerful, automated feature that checks the logical and physical integrity of your design. The PCB Rules And Violations panel allows easy browsing of the enabled design rules and violations in the current board layout workspace. The panel provides a central point for browsing and editing rules, instigating design rules checks, and viewing individual violations as graphic overlays in the editor workspace.

Panel Access

Access the PCB Rules And Violations panel by clicking Home | Design Rules|  from the main menu. The Rules And Violations panel becomes accessible when the the PCB Editor is active.

Panels can be configured to be floating in the editor space or docked to sides of the screen. If the PCB Rules and Violations panel is currently in a group of docked panels, use the PCB Rules And Violations tab located at the bottom of the panels to bring it to the front.

Selecting Rules and Violations

The body of the PCB Rules And Violations panel has three sections, each offering a finer scope of the design rules and violations:

  1. Rule Classes – Design rules grouped by classes, such as Clearances and Widths.
  2. Rules – The individual design rules within the selected class. The specific Design Rule Check (DRC) can be run via the right-click menu.
  3. Violations – Details of each rule violation reported by activated design rules checks.

Selecting an individual rule violation causes the design workspace to graphically highlight that violation. Enhanced violation graphics are drawn only on the layers where the offending primitives reside, and that layer (if enabled) will become the active layer in the workspace.

When the rule violations details are enabled (see below), the editor's graphics will display the constraint value defined for the rule and indicate how the offending primitive(s) are either below or above this value.


Violation of a minimum Width rule set to 5mil for Net GRN_N.

Note that if you have the Zoom highlighting method enabled, the workspace will be zoomed in to fit the browsed violation for a more precise view of the violating area. You can use the panel's Zoom Level button to adjust the amount of zoom.


The zoom precision popup window lets you define the level of zoom using a scale from Far to Close.

You can also view details of a violation from the PCB Rules and Violations panel or within the design workspace:

  • In the panel, double-click on a violation entry in the Violations list to open the Violation Details dialog.
  • In the workspace, with the cursor over an offending primitive, right-click and select Violations from the context menu, then select the appropriate violation to open the Violation Details dialog.

  
Detailed information of the rule violations examples are shown in the workspace graphic images above.

Listed violation entries can be cleared by right-clicking on the rule class (or on All Rules) and selecting Clear Violations for Rule Class. Violations listed for a particular rule are cleared by selecting Clear Violations for Rule from the rule name's right-click menu. Home | Design Rules | Design Rule Check » Reset Error Markers will also clear the current violations.

Setting the visual filtering

The visual result of the panel selections on the document in the design editor window is determined by a series of highlighting controls toward the top of the panel. The effect that is imposed in the editor view can be set to Normal, Mask or Dim, where in practice, Mask has the most obvious highlighting effect.

The Normal / Mask / Dim drop-down list provides options for visibly contrasting filtered and unfiltered objects within the design editor window.


Select the type of visual filtering applied using the masking mode drop-down list.

The visual highlighting effect for each masking mode:

  • Normal – Filtered objects are visible in the design editor window and the appearance of unfiltered objects remains unchanged.
  • Mask – Filtered objects are highlighted in the design editor window, with all other objects displayed in monochrome.
  • Dim – Filtered objects are highlighted in the design editor window, with all other objects retaining their colors, but shaded. 

Click the  button to confirm a visual filtering change and refresh the editor window.

Display control

In Mask view mode, unfiltered (not selected) objects are monochrome. To set the contrast of the background (un-highlighted) objects, use the Mask Level slider control available in the View | Highlight & Edit Mask group.

Similarly, in Dim view mode unfiltered objects retain their colors, but are shaded. Set the balance between filtered and unfiltered objects using the Dim Level slider available in the View | Highlight & Edit Mask group, as shown above.

Use the View | Highlight & Edit Mask |  button or the panel's button to remove the display highlighting.

Filter options

The panel's check boxes apply these filter actions:

  • Select – When enabled, the filtered objects will be selected in the workspace.
  • Zoom – When enabled (default), the filtered objects will be zoomed and centered (where possible) in the design editor window. Use the  button to adjust the zoom factor that will be used to close in on filtered objects.
  • Clear Existing – When enabled (default), any existing filter will be cleared before applying a new one. Disabling this option allows you to extend an existing filter, essentially refining the filter further by applying a new filter in addition to the existing one.

Any combination of these options can be enabled. For example, you might want to have all filtered objects zoomed, centered, and selected in the design editor window, while applying masking to hide the clutter of other design objects.

Use the  button to disable the currently applied filter. All objects in the design workspace will become fully visible and available for selection/editing. To reapply the filter, click the button.

Controlling the Display of DRC Violations

The visual display of DRC violations can be configured to maximize clarity and/or suit your own preferences by setting the style, number, and color of the graphic markers. Along with the graphic display of violation details, the design primitives can be overlaid with a graphic pattern selected from a number of styles.

Violation Display Preferences

Control over how DRC violations are displayed – using the custom violation graphics and/or a defined violation overlay – is specified on the PCB Editor – DRC Violations Display page of the Preferences dialog (File »  button).

Violation display peferences are available to:

  • Specify the overlay pattern or color style for highlighted Rule Violations.
  • Set how Violation display styles are handled when you zoom in and out – how a pattern or color displays with zoom levels, and the amount of detail (ranging from Far to Close).
  • Define a Violation display style for each type of Rule, enabling or disabling graphical violation details and overlay for each rule type.

Defining Violation Colors

To provide further flexibility when displaying rule violations in the workspace, the two violation display types – violation details and violation overlay – have separate associated system colors. This allows you to differentiate between the two using different colors.

Color assignment is performed in the View Configurations dialog – in 2D Layout Mode, click View | View |  » View Configurations » View Configuration, or just press the L key.


In the View Configurations dialog, specify different coloring for the two violation display types, and enable/disable their display, as required.

Right-Click Menus

The entries in each section of the PCB Rules And Violations panel offer a range of options via the right-click menu:

Rule Classes

  • Select All – Selects all PCB design rule classes in the list and also in the design editor window.
  • Clear Filter – Disables the currently applied filter. All objects in the design workspace will become fully visible and available for selection/editing.
  • Report – Runs a report from SOLIDWORKS PCB based on current selection.
  • Run Selected DRC Rule Class(es) – Runs selected rules contained in the class. Classes may contain a single rule (such as Short-Circuit Constraint) or a large number (typically, the Clearance Constraint class).
  • Clear Violations for Selected Rule Class(es) – Clears the violations (both graphically and listed in the panel) for all rules contained in the class. Use the  button to reset workspace highlighting.

Rules

  • Select All
  • Clear Filter
  • Report – Generates a report from SOLIDWORKS PCB based on the current selection. For example, a Rules report displays the Name, Scope, Attributes, and On (True/False) values for the selected rule(s).
  • Run DRC Rule – Runs the selected rule.
  • Clear Violations for Rule – Clears the violations reported by the selected rule.
  • Properties – Opens the Edit PCB Rule dialog, allowing the rule configuration to be changed on the fly. This is the equivalent of double-clicking on the rule name.


    Rules can edited on the fly from the PCB Rules And Violations panel.

Violations

  • Properties – Opens the Violation Details dialog, which provides full details of the rule constraint and the current violation. Equivalent of double-clicking on the violation entry.
  • Zoom Selected – Zooms workspace to the selected violation(s). Useful when the Zoom checkbox option is not enabled.

Notes

  • For full access to the PCB Constraint Classes and Rules, open the PCB Rules and Constraints Editor dialog using the Home | Design Rules |  button.
  • Online Design Rule Checking can be enabled or disabled in the PCB Editor - General page of the Preferences dialog – File » .
  • Design Rules can be individually enabled for Online or Batch checking (or both) in the Design Rule Checker dialog – Home | Design Rules | button.
     
You are reporting an issue with the following selected text and/or image within the active document: